DAYTONA 675 TRIPLE - SPECIFICATION
 Engine Type Liquid-cooled, DOHC, in-line 3-cylinder
 Capacity 675cc
 Bore/Stroke 74.0 x 52.3mm
 Compression Ratio 12.65:1
 Fuel System Multipoint sequential electronic fuel injection with forced air induction
 Ignition Digital - inductive type - via electronic engine management system
 Primary Drive Gear
 Final Drive O ring chain
 Clutch Wet, multi-plate
 Gearbox 6-speed, close ratio
 Frame Aluminium beam twin spar
 Swingarm Braced, twin-sided, aluminium alloy with adjustable pivot position
 Wheels  Front Alloy 5-spoke, 17 x 3.5in
 Rear Alloy 5-spoke, 17 x 5.5in
 Tyres  Front 120/70 ZR 17
 Rear 180/55 ZR 17
 Suspension  Front 41mm USD forks with adjustable preload, rebound and compression damping
 Rear Monoshock with piggy back reservoir adjustable for preload, rebound and compression damping
 Brakes  Front Twin 308mm floating discs, 4 piston radial calipers with radial master cylinder
 Rear Single 220mm disc, single piston caliper
 Length 2010mm (79.1in)
 Width (Handlebars) 673mm (26.5in)
 Height 1109mm (43.7in)
 Seat Height 825mm (32.5in)
 Wheelbase 1392mm (54.8in)
 Rake/Trail 23.5°/86.8mm
 Weight (Dry) 165kg (363lbs)
 Fuel Tank Capacity 17.4 litres (4.6 gal US)
 Maximum Power 125PS (123bhp) at 12,500 rpm
 Maximum Torque 72Nm (53ft.lbf) at 11,750 rpm
 Price  tbc
 PERFORMANCE MEASURED AT CRANKSHAFT TO DIN 70020

 ※ 上記、諸元表の値は 発表時のものであり、日本国内で発売された場合に異なる場合がございます。